Filter
Top Products
8
On cleaning
Clean the cabinet, panel and controls with a soft dry
cloth, or a soft cloth lightly moistened with a mild
detergent solution. Do not use any type of solvent, such
as alcohol or benzine, which may damage the finish.
On the print cartridge and print
paper
Notes on storing the print cartridge
• Avoid placing the cartridge in a location subject to:
– high temperatures
– high humidity
– excessive dust
– direct sunlight
• When you are going to store a partially-used cartridge
for an extended period of time, store it in its original
bag.
Notes on storing the print paper
• Avoid placing the print paper in a location subject to:
– high temperatures
– high humidity
– excessive dust
– direct sunlight
• When you are going to store the partially-used print
paper for an extended period of time, store it in its
original bag.
Precautions
For Your Information
For Your Information
On safety
• Operate the printer on 120 V AC, 60 Hz only.
• Be careful not to put or drop any heavy objects on the
power cord, or to damage the cord in any way. Never
operate this printer with a damaged power cord.
• Should any solid object or liquid fall into the cabinet,
unplug the printer and have it checked by qualified
personnel before operating it any further.
• To disconnect the cord, pull it out by the plug. Never
pull the cord itself.
• When the printer is not going to be used for an
extended period of time, disconnect the power cord
from the wall outlet.
• Never disassemble the printer.
• Do not handle the printer roughly.
• To reduce the risk of electrical shock, always unplug
the printer from electrical outlet before cleaning and
servicing the printer.
On installation
• Avoid placing the printer in a location subject to:
– vibration
– high humidity
– excessive dust
– direct sunlight
– extremely high or low temperatures
• Do not use electronic equipment near the printer. The
printer will not work properly in electromagnetic
fields.
• The printer is designed to operate horizontally. Never
attempt to incline the printer.
• Do not place heavy objects on the printer.
• Leave enough room around the printer so that the
ventilation holes are not blocked. Blocking these holes
may cause internal heat build-up.
• Do not cover the printer with cloth or other materials.
On moisture condensation
If the printer is brought directly from a cold location to
warm location or placed in an extremely warm or humid
room, moisture may condense inside the unit. In such
cases the printer will probably not work properly and
may even develop a fault if you persist in using it. If
moisture condensation occurs, turn off the power and do
not use the printer for at least one hour.