Filter
Top Products
3-11
ROUTING SWITCHER SYSTEM (E)
3-5. Setting Screen
3-5. Setting Screen
Set the items in the menu in the setting screen.
To call the setting screen, select the menu item with the cursor key or input it using the alphabet key, and
press [Enter].
(The same procedure for calling the setting screen is applied to both the primary station menu and
secondary station menu.)
The screen returns to the menu screen when [Ctrl] _ [E] is pressed at each menu item.
Then if [Ctrl] _ [X] is pressed, the screen will return to the system status screen.
n
The setting screen of menu items “C“, “D”, “E”, “H”, “L”, “M”, “N”, “O”, and “Q” may differ according
to the source/destination name mode set at menu item “J”.
For the “Type
++
++
+ Num” mode:
. The name of the destination or source will be displayed in the form of type name and number.
. To set or change the name, select any name from the list displayed at the bottom of the screen and
then input it using the numerical keys.
For the “DESCRIP.NAME” mode:
. The name of the destination or source will be displayed in the form of the Description.
. To set or change the name, directly input it using the alphabet or numerical keys.
Unless otherwise noted, the setting screen used in this manual are that of the “Type + Num” mode.