Filter
Top Products
8
Connecting the Projector
B Preparation
Connecting the Projector
• Turn off all equipment before making any connections.
• Use the proper cables for each connection.
• Insert the cable plugs firmly; Loose connections may reduce performance of picture signals or
cause a malfunction. When pulling out a cable, be sure to grip it by the plug, not the cable itself.
• For more information, refer also to the instruction manuals of the equipment you are connecting.
• Use a no-resistance audio cable.
Connection with a computer is explained for each input signal.
INPUT A
For connection when there is some distance between a computer and the projector.
INPUT B
For connecting a computer with an RGB output connector.
It is recommended that you set the resolution of your computer to 1920 × 1200 pixels (VPL-FH36/
FH35/FH31/FH30) or 1024 × 768 pixels (VPL-FX37/FX35/FX30) for the external monitor.
Notes
Connecting a Computer
Mini D-sub 15-pin
– BNC cable
(not supplied)
Audio cable
(Stereo mini plug)
(not supplied)
RGB output
connector
Audio output
connector
Computer
Note
Mini D-sub 15-pin
cable
(not supplied)
Audio cable
(Stereo mini plug)
(not supplied)
RGB output
connector
Audio output
connector
Computer