Sony FWDS42H2DS Computer Monitor User Manual


 
8
GB
Recommendations on
Installation
Provide an ample amount of space around
the display
To prevent internal heat buildup from sealing off the
display, make sure to ensure proper ventilation by leaving
open the minimum amount of space around the display, as
illustrated below.
The ambient temperature must be 0
°C to 40 °C (32 °F to
104
°F). Be careful when installing the display near a
ceiling. The temperature there can become much higher
than the normal, lower-level room temperature.
When using the stand, you use the applicable Tabletop
Stand SU-S02 (not supplied).For the fitting method, see
the installation manual of the Tabletop Stand.
Consult with Sony qualified personnel for wall mount
installation.
Regarding the installation of hardware such as brackets,
screws, or bolts, we cannot specify the products. Actual
installation is up to the authorized local dealers. Consult
with qualified Sony personnel for installation.
While the display is on, a certain amount of heat builds up
inside. This can cause burns. Avoid touching the top or
rear of the display when it is powered on or just after it has
entered standby mode.
When using the Tabletop Stand
Front
Side
Units: cm (inches)
25 (9
7
/8)
10
(4)
10
(4
)
10 (4)
When moving or installing the display when it is attached to
the tabletop stand (not supplied), do so with at least 2 people.
Note