Filter
Top Products
13
GB
GB
8AC IN socket Connect the supplied AC power cord to this socket and to a wall outlet (page 22).
Once you connect the AC power cord and turn on main power switch, the
1 indicator
lights up in red and the display goes into the standby mode.
9 / (main power) switch Turn the main power switch to “ON”(press the side) when setting up the display.
When the main power switch is turned “OFF” (press the side), the power consumption
is 0W.
0 SPEAKER socket Connect the speakers SS-SPG02 (not supplied) to this socket. For more details on
connecting the speakers, see the operating manual that came with the speakers. For details
on how to route the speaker cords, see page 23.
qa OPTION slot
(VIDEO/COM port)
Attach an optional adaptor (the BKM-FW series) in this slot to extend monitor functions
(page 21).
qs AUDIO OUT (L/R)
(RCA connector)
This is the audio monitor output terminal for external devices. Outputs an audio of the
signal currently indicated on the screen. Outputs an audio signal corresponding to the
active* picture when displaying Picture in Picture (PinP).
• Settings assigned in “Sound Mode” or “Speaker Out” will not be reflected.
• The noise reduction status set by the remote control is not reflected.
qd HD15 (RGB/
COMPONENT)
(D-sub 15-pin)
HD15 (RGB/COMPONENT) IN: Connects to the analog RGB signal or component
signal output of a piece of video equipment or PC (page 45).
HD15 (RGB/COMPONENT) OUT: Connects to the analog RGB signal or component
signal input of a piece of video equipment or PC (page 45). Signals input from the HD15
(RGB/COMPONENT) IN connector above will be output.
AUDIO IN: Inputs an audio signal. Connects to the audio signal output of a piece of
video equipment or PC.
• When the display is not connected to an AC power or is in the standby mode, no signal is
output from the HD15 (RGB/COMPONENT) OUT.
• When inputting a component signal, be sure not to input sync signals to pins 13 and 14. If you
do so, the picture may not be displayed properly.
* The status when the sound is output and the input signal can be switched.
Parts Description
Notes
Notes