Filter
Top Products
Specifications
23
Specifications
Picture performance
LCD panel a-Si TFT Active Matrix
Picture size 15.6 type
344 × 194, 395 mm
(W/H, Diagonal)
(13
5
/8 × 7
3
/4, 15
5
/8 inches)
Resolution 1366 × 768 dots
Viewing angle (LCD panel specifications)
170°/160° (Horizontal/Vertical)
(typical)
Scan Normal 0%
Over 5%
Aspect 16:9
Display color 16,770,000
Input/output connectors
Input
LINE input connectors
Y/C input 4-pin mini-DIN (1)
VIDEO input
BNC type (1), 1 Vp-p ±3 dB, negative
synchronization
AUDIO input
Phono jack (1), –5 dBu 47 kΩ or higher
RGB/COMPONENT input connectors
BNC type (3)
RGB input 0.7 Vp-p ±3 dB, (Sync On Green,
0.3 Vp-p negative sync.)
Component input
0.7 Vp-p ±3 dB, (75% chrominance
standard color bar signal)
AUDIO input
Phono jack (1), –5 dBu 47 kΩ or higher
OPTION IN connector
D-sub 9-pin (1), female
OPTION AUDIO IN connector
Phono jack (1), –5 dBu 47 kΩ or higher
External synchronized input connector
BNC type (1), 0.3 to 4 Vp-p negative
polarity binary
HDMI IN connector
HDMI (1)
PARALLEL REMOTE input connector
Parallel remote
Modular connector 8-pin (1)
Output
LINE output connectors
Y/C output 4-pin mini-DIN (1), Loop-through,
with 75 Ω automatic terminal
function
VIDEO output
BNC type (1), Loop-through, with
75 Ω automatic terminal function
AUDIO output
Phono jack (1), Loop-through
RGB/COMPONENT output connectors
RGB/Component output
BNC type (3), Loop-through, with
75 Ω automatic terminal function
AUDIO output
Phono jack (1), Loop-through
External synchronized output connector
BNC type (1), Loop-through, with
75 Ω automatic terminal function
Built-in speaker output
0.5 W (mono)
General
Power AC 100 to 240 V, 50/60 Hz
Power consumption
Maximum: approx. 40 W, 0.7 A to
0.4 A
Inrush current (1) Maximum possible inrush current
at initial switch-on (Voltage
changes caused by manual
switching):
63A peak, 0.4A r.m.s. (240V AC)
(2) Inrush current after a mains
interruption of five seconds
(Voltage changes caused at zero-
crossing):
51A peak, 0.3A r.m.s. (240V AC)
Operating conditions
Temperature
0 °C to 35 °C (32 °F to 95 °F)
Recommended temperature
20 °C to 30 °C (68 °F to 86 °F)
Humidity 30% to 85% (no condensation)
Pressure 700 hPa to 1060 hPa
Storage and transport conditions
Temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Humidity 0% to 90%
Pressure 700 hPa to 1060 hPa
Accessories supplied
AC power cord (1)
AC plug holder (1)
Operating Instructions (1)
CD-ROM (1)
Using the CD-ROM Manual (1)
Warranty book (1)
Optional accessories
Mounting bracket MB-535
SDI input adaptor BKM-320D
HD/SD-SDI input adaptor BKM-
341HS