Filter
Top Products
Adjustment Using the Menus
18
Adjustment Using the
Menus
Items
The screen menu of this monitor consists of the
following items.
STATUS (the items indicate the
current settings.)
FORMAT
COLOR TEMP
HDMI FORMAT
NTSC SETUP
SCAN MODE
POWER SAVING
I/P MODE
Model name and serial number
COLOR TEMP/SPACE
COLOR TEMP
MANUAL ADJUSTMENT
COLOR SPACE
USER CONTROL
SUB CONTROL
AUTO CHROMA/PHASE
PICTURE CONTROL
INPUT SETTING
USER CONFIG
SYSTEM SETTING
NTSC SETUP
FORMAT DISPLAY
LANGUAGE
POWER SAVING
I/P MODE
LED BRIGHTNESS
RGB RANGE
MARKER SETTING
MARKER ENABLE
MARKER SELECT
CENTER MARKER
MARKER LEVEL
MARKER MAT
WFM/ALM (waveform monitor and audio level
meter) DISPLAY SETTING
WFM/ALM
WFM/ALM SELECT
POSITION
TRANSPARENCY
FUNCTION BUTTON SETTING
F1 BUTTON
F2 BUTTON
F3 BUTTON
F4 BUTTON
F5 BUTTON
F6 BUTTON
F7 BUTTON
AUDIO SETTING
SDI AUDIO SETTING
REMOTE
PARALLEL REMOTE
SERIAL REMOTE
KEY INHIBIT
KEY INHIBIT
Adjusting and Changing the
Settings
STATUS menu
The STATUS menu is used to display the current status
of the unit. The following items are displayed:
• Signal format
• Color temperature
• HDMI format
•NTSC setup
• Scan mode
• Power saving
• I/P mode
• Model name and serial number
COLOR TEMP/SPACE menu
The COLOR TEMP/SPACE menu is used for adjusting
the picture white balance or color space.
FORMAT xxxxxxxxx
xxxxxxxx
COLOR TEMP xxx
HDMI FORMAT xxxxx
NTSC SETUP x
SCAN MODE xxxxxxxx
POWER SAVING xx
I/P MODE xxxxxxx
STATUS 1/2
LMD-940W xxxxxxx
STATUS 2/2