Filter
Top Products
Adjustment Using the Menus
25
REMOTE PARALLEL menu
Select the PARALLEL REMOTE connector pins for
which you want to change the function.
You can assign various functions to 1 to 4 pins and 6 to
8 pins. The following lists the functions you can assign
to the pins.
• – – – (“– – –”: No function is assigned.)
•LINE A
•LINE B
•RGB/COMP
• 16:9
•4:3
• UNDER
• NORMAL
• ZOOM (LMD-1420/2020 only)
• TALLY R (LMD-1420/2020 only)
• TALLY G (LMD-1420/2020 only)
• EXT SYNC (LMD-1420/2020 only)
• BLUE ONLY (LMD-1420/2020 only)
• 16:9 MARKER (LMD-1420/2020 only)
• 15:9 MARKER (LMD-1420/2020 only)
• 14:9 MARKER (LMD-1420/2020 only)
• 13:9 MARKER (LMD-1420/2020 only)
• 4:3 MARKER (LMD-1420/2020 only)
• CENTER MARKER (LMD-1420/2020 only)
• SAFETY AREA 80% (LMD-1420/2020 only)
• SAFETY AREA 85% (LMD-1420/2020 only)
• SAFETY AREA 88% (LMD-1420/2020 only)
• SAFETY AREA 90% (LMD-1420/2020 only)
• SAFETY AREA 93% (LMD-1420/2020 only)
• SDI (LMD-1420/2020 only)
If you use the PARALLEL REMOTE function, you
need to connect cables. For more details, see page 28.
KEY INHIBIT menu
You can lock the setting so that they cannot be changed
by an unauthorized user.
Select OFF or ON.
If you set ON, all items are displayed in blue, indicating
the items are locked.
SCAN Sets the scan size of the picture. Select
from “OFF” and “ZOOM” mode.
PIC DELAY MIN Selects to set the delay by the picture
processing to the minimum level when
the signal is input.
• OFF: Mode for giving precedence to
the picture quality (recommended
mode). It takes longer than “ON”
for processing the picture.
• ON: The processing time is short. As
the line flicker is displayed in this
mode, it is available for checking
the line flicker of the telop work
and so on.
Input
NORMAL
SCAN (5 %
OVERSCAN)
UNDER
SCAN
ZOOM
–
Submenu Setting
4
3
16
9
Output
3
4
9
16
x1PIN xxxxx
· 2PIN xxxxx
· 3PIN xxxxxxx
· 4PIN xxxxxxx
· 6PIN xxxxxxxx
· 7PIN xxxxxxxxx
· 8PIN xxxx
REMOTE PARALLEL
xKEY INHIBIT xxx
KEY INHIBIT