Filter
Top Products
BM-850D/T 3-757-398-32UE
17
Operations
Telephone Recording
To record telephone
conversation, connect the
optional TL-4 telephone
recording adaptor* to the
TELEPHONE PICKUP jack.
For further details, refer to the
instruction manual of the
telephone recording adaptor.
* The TL-4 cannot be used on
some telephones.
At the beginning of
telephone recording
LTR signal is automatically
recorded for about 3 seconds and
the telephone recording begins at
the same time.
While the LTR signal is being
recorded (for about 3 seconds), the
unit cannot be stopped even
though the STOP button is
pressed.
During telephone recording
Only the LTR, SEC and STOP
buttons are operative.
1
TL-4 (not
supplied)
BM-850
Rear
to TELEPHONE
PICKUP
Telephone
3
4
5
2
p STOP
REC/ERASE
Note
If the TEL REC button is pressed
when the telephone recording
adaptor, etc. is not connected, the
beep tone will be heard and the
recording will not start.
1 Connect the TL-4 (not supplied) to the unit.
2 Set POWER to ON.
3 Insert a cassette. (See page 7.)
4 Set TAPE SPEED to the desired tape speed.
5 Keep TEL REC pressed for more than a second.
Telephone recording begins. REC/ERASE lamp blinks and (
appears on the display window.
To stop the tape
Press p STOP.