Filter
Top Products
15
GB
Installation
Continued
MPF88E-UA/4-679-609-21 (1)
Installing the
Windows 98
Device Driver
This section explains how to install the
drive device driver on a system running
Windows 98.
To install the device driver
1 Insert USB Floppy Disk Drive
Device Driver CD-ROM into the
CD-ROM drive of your
computer.
2 Connect the USB connector of
the drive to the USB port of
your computer.
The Add New Hardware wizard
starts and the following dialog box
appears.
3 Click [Next].
The following dialog box appears.
4 Select “Search for the best
drivers for your device
(Recommended)”, and then
click [Next].
The following dialog box appears.
5 Select the “Specify a location”
check box and type “X:\Win98”
(where X is your CD-ROM drive
letter) in the box, and then click
[Next].
The following dialog box appears.
6 Confirm the location of the
device driver.
Note
If the location is not
“X:\WIN98\SONYUFD1.INF” (where X
is your CD-ROM drive letter), click
[Back] and return to step 4.