Filter
Top Products
21-EN
EN
F
ES
Items in STANDBY mode only
FILE NUMBER <SERIES/NORMAL*>
• Select SERIES to continue to number the image files sequentially from one floppy
disks to another.
• Select NORMAL to number the image files from 001 in each floppy disk.
Notes on the SERIES setting
• The image files are numbered up to 999 irrespective of turning the power on/off.
• If you record the files with file numbers exceeding 900 and eject the floppy disk,
the file number is reset to 001. The file number starts from 001 in the new floppy
disk. If the floppy disk already has image files recorded, the file number starts
from the number following the last file number.
BITMAP <ON/OFF*>
• Select ON to record the image as a BITMAP file. The image is not compressed and
therefore the data is large. The file extension is “BMP.”
• Select OFF not to record the image as a BITMAP file.
If you set BITMAP to ON
• When the image recorded as a BITMAP file, it is recorded also in JPEG format with
the extension “JPG.”
• You cannot play back the BITMAP file with this unit. The unit displays the image
recorded in JPEG format instead of the BITMAP file.
• You can record only one image as a BITMAP file with this unit.
QUALITY <STANDARD/FINE*>
• Select STANDARD to record an image in standard quality.
• Select FINE to record a image in high quality.
See page 13 for the number of recordable images in each mode.
Items in PLAY mode only
SLIDE SHOW <20 S/10 S/5 S/NORMAL PLAY*>
You can play back all images in the floppy disk in a continuous loop.
• Select 20 S to play back images with 20-second intervals.
• Select 10 S to play back images with 10-second intervals.
• Select 5 S to play back images with 5-second intervals.
• Select NORMAL PLAY to cancel SLIDE SHOW playback.
To start SLIDE SHOW playback, select ( on the screen with the control button and
press it. To pause the playback, select P with the control button and press it.
On the Remote Commander, press (/P to start SLIDE SHOW and press (/P again
to pause the playback. You can start and pause the playback by pressing (/P
repeatedly.
To return to normal playback, select NORMAL PLAY.
Continued to the next page