Filter
Top Products
Sony Notebook User Guide
Getting help
98
nN
The optional PCGA-UFD5 (USB) floppy disk drive is not recognized as drive A
To set the UFD5 to A, proceed as follows :
1 Turn the system power on.
2 Connect the UFD5.
3 Select Control Panel from the Start menu.
4 Double-click System.
5 Select the Hardware tab, then click Device Manager.
6 Select Universal Serial Bus controllers, then Y-E Data USB Floppy.
7 From the Action menu, click Uninstall.
8 Keep clicking OK until the Confirmation of deletion of device message appears.
9 Select Scan for hardware changes from the Action menu.
The UFD5 is recognized as drive A.
About sound
My speakers are not producing sound
❑ The built-in speakers may be turned off. Press <Fn>+<F3> to turn on the speakers.
❑ The speaker volume may be turned to the minimum. Press <Fn>+<F4>, and then press or to increase
the volume.
❑ If your computer is powered by battery, check that the battery is inserted properly and that it is charged.
❑ If you are using an application that has its own volume control, check that the volume is turned up.
❑ Check the volume controls in Windows
®
.