Filter
Top Products
PCS-G50 and PCS-G70 Video Communication Systems
FAQ 11
OPERATION FAQ
Q. How do I edit Phonebook data on the PC?
A. Use Phonebook edit software, which can be downloaded from:
http://www.sony.com/videoconference
Refer to the operation manual.
Q. Where can I get a list of service commands?
A. Service Commands are listed in the Release Notes and are
available from:
http://www.sony.com/videoconference
Q. How do I check call status?
A. Press 00 on the remote commander during the communication and
you will be taken directly to the Communication Status page in the
menus. Press 0 again to clear the menu.
Q. How do I get to the administrator setup menu on the GUI?
A. Press and hold the menu button on the remote commander for five
seconds, or push the 9 button twice.
Refer to the release notes for a list of keyboard shortcuts.
Q. Can I customize the menu screen?
A. Yes. The launcher screen of the PCS-G50/G70 can be customized
from the menu settings. The background pattern can be selected
from four graphic patterns.
Q. Can the start up logo be changed?
A. Yes. Detailed instructions are available from:
http://www.sony.com/videoconference
, “How to Change the
startup logo screen”
TROUBLESHOOTING FAQ
Q. I cannot see near-PC images.
A. PCS-G50/G70 can output far-site PC images from RGB output on
the communication terminal and from RGB output on the DSB.
However, near-site PC images can be output from the RGB output
on the DSB only.