Filter
Top Products
1212 (EN)
Location and Function of Parts and Controls
Remote Commander RM-921
2
5
8
ZOOM
DISPLAY
RGB2
Y/C
SELECT
VOL
3
6
9
CH
DEGAUSS
POWER
YUV
MTS/MPX
CH
1
4
7
10/0
STILL
MUTING
RGB1
LINE
MENU
ENTER
ON
OFF
ON
POWER
ID MODE
SET
OFF
!™
!£
!¢
!∞
!§
!¶
!•
!ª
@º
@¡
1
2
3
4
5
6
7
8
9
0
!¡
1 POWER switch
Press to turn on the monitor. Press again to go back to
the standby mode.
Note
When using multiple monitors, press this switch to
turn monitors which are already on into the standby
mode, or turn on monitors which are in the standby
mode.
2 MUTING button
Press to mute the sound. Press this button again or
press the VOL (volume) +/– button to obtain the sound
again.
3 RGB1/RGB2 buttons
Select the signal input from the RGB1 or RGB2
connectors.
4 LINE button
Selects the signal input from the VIDEO IN connector
in the LINE connectors.
5 Y/C button
Selects the signal input from the Y/C IN jack in the
LINE connectors.
6 Number buttons
Press to select the index number.
7 ZOOM button
Adjusts the zoom. Each time you press the ZOOM
button, the picture is magnified by two, three, and four
times respectively.
8 STILL button
Freezes a picture on the monitor screen. Press again to
resume normal screen.