Sony PRS300SC/EPL eBook Reader User Manual


 
PRS-300.GB.4-151-151-11(1)
Getting Started
Charging the Reader
About charging
Charging the Reader is required when using it for the first
time or the remaining battery is low. Turn on the Reader, and
then charge in one of the following ways.
• Connect to a computer via USB.
(Charging time: approx. 3.5 hours*)
• Connect to an AC outlet using the A
C Adapter for Reader (AC-
S5220E) (optional).
(Charging time: approx. 2 hours*)
* Approximate time required to fully charge the battery.
Charging the Reader via USB connection
To charge the Reader via USB connection, follow the steps
below.
Before connecting via USB, slide the POWER
switch.
The Reader is turned on.
Note
• If the Reader does not turn on, the batter
y has been fully
depleted. In this case, go to the next step. Although charging is in
progress (charge indicator lights up in red), the Reader will not
turn on until (indicating connection via USB) appears on the
screen (it takes at least 40 minutes).
Continued
11