Filter
Top Products
GB
24
Projecting
Projecting
1 Plug the AC power cord into a wall outlet, then connect all equipment.
The ON/STANDBY indicator lights in red and the projector goes into
standby mode.
2 Press the I / 1 key.
The ON/STANDBY indicator lights in green.
3 Turn on the equipment connected to the projector.
4 Press the INPUT key to select the input source.
To input from Press INPUT to display
Computer connected to the INPUT A connector INPUT A
Computer connected to the INPUT B connector INPUT B
Computer connected to the INPUT C (digital) connector INPUT C
Computer connected to the INPUT D connector INPUT D
Video equipment connected to the VIDEO input
connector
VIDEO
MUTING
PIC
AUDIO
LENS
APA
LASER
INPUT
D KEYSTONE
HELP
PJ NETWORK
ON
COMMAND
OFF
VOLUME
MENU/
TAB
FREEZE
INPUT
VOLUME
APAMENU
RESETENTER
I/
LAMP/
COVER
TEMP/
FAN
POWER
SAVING
ON/
STANDBY
ON/STANDBY
indicators
Rear remote control
detector