Filter
Top Products
the flashgun is in flash mode "Remote-SLAVE".
• Detach the flashgun from the camera - once
removed, the flashgun can now be used as a sla-
ve flashgun.
• Open out the camera flash
• Trigger a test flash on the camera, the slave flas-
hgun should respond with a delayed flash
• The setup is now ready for use
Important: When the slave flashgun is switched
off it loses the remote function and
has to be switched back into remote
mode by connecting it with the came-
ra.
It is possible to deactivate the remote function:
a) by switching off the flashgun
b) by connecting it with the camera - deselecting
"WIRELESS" on the camera and activating the
camera by touching the camera's release button
Setting procedure with the mecablitz 76MZ-5
digital
• Equip flashgun with adapter
• Attach flashgun with adapter to the camera
• Switch on flashgun and set to "TTL"
• Switch on camera and set to "WIRELESS"
• To set the remote address (if not already pro-
grammed beforehand):
• Press the "Sel" key twice on the mecablitz and
use the ̆̄ keys to select "REMOTE".
40
700 47 0113.A10 GB-I-E 20.02.2008 13:15 Uhr Seite 40