Filter
Top Products
LOG SENSE 6.Command Specification
SONY AIT-5 drive SDX-1100V series Ver.1.0 6-27
All board revision number is 8 bytes long and has a following format:
Table 6-29: All Board Revision Number Parameter Format
0
1
Set revision
2
3
Board revision
4
5
Mechanism revision
6
7
RF revision
Each Mechanism Error Event is 24 bytes long and has following format:
Table 6-30: Mechanism Error Event Format
Byte offset Meaning
0-3
4-7
Drum revolution minutes
Error code
6.6.10. Read and Write Frame Error Counter Page (34h & 35h)
The Read and Write Error Counter Page has the following format. All fields in these logs are initialized to ZERO in
the following circumstances:
At Power On
After a cassette unloading
After a user sends a request for initialization through Log Select
Table 6-31: Read and Write Frame Error Counter Page
Bit
Byte
7 6 5 4 3 2 1 0
0 Page Code (34h Write Frame Error Counters, 35h Read Frame Error Counters)
1 Reserved
2 (MSB) Page Length (88h)
3 (LSB)
Error Counter Descriptors
Bit
Byte
7 6 5 4 3 2 1 0
0 (MSB) Parameter Code
1 (LSB)
2 DU (0) DS (1) TSD (0)
ETC (0)
TMC (0) LBIN (0) LP (0)
3 Parameter Length (4)
4 (MSB) Parameter Value
7 (LSB)
Parameter Code: This identifies which parameter of data is being transferred. The following codes are supported
for each Error Counter Page.