Filter
Top Products
Connections and
Preparations
9
GB
Step 2: Connecting the Projector
When making connections, be sure to do the
following:
• Turn off all equipment before making any
connections.
• Use the proper cables for each connection.
• Insert the cable plugs properly; plugs that are not
fully inserted often generate noise. When pulling
out a cable, be sure to pull it out from the plug, not
the cable itself.
• Refer to the operating instructions of the connected
equipment.
• When you connect your projector to PJ MULTI,
select the input signal with the “Input-A Signal Sel.”
setting in the SET SETTING menu. (1 page
31)
--------------------------------------------------------------------------
• HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing LLC.
Step 2:
Connecting the
Projector