Sony CPD-E210 Computer Monitor User Manual


 
D:\###sagyou\02 gatu\0203-ya\874120S CPD-E210\01US03BAS-UC.fm
masterpage:Left
CPD-E210
4-077-098-11 (1)
Sony Corporation Printed in MexicoPrinted in Thailand
Self-diagnosis function
This monitor is equipped with a self-diagnosis function. If there is
a problem with your monitor or computer, the screen will go
blank and the
1
(power) indicator will either light up green or
flash orange. If the
1
(power) indicator is lit in orange, the
computer is in power saving mode. Try pressing any key on the
keyboard.
If the
1
(power) indicator is green
1
Disconnect the video input cable or turn off the
connected computer.
2
Press the
1
(power) button twice to turn the monitor
off and then on.
3
Move the control button
,
for 2 seconds before the
monitor enters power saving mode.
If all four color bars appear (white, red, green, blue), the monitor
is working properly. Reconnect the video input cable and check
the condition of your computer.
If the color bars do not appear, there is a potential monitor failure.
Inform your authorized Sony dealer of the monitor’s condition.
If the
1
(power) indicator is flashing orange
Press the
1
(power) button twice to turn the monitor off
and then on.
If the
1
(power) indicator lights up green, the monitor is working
properly.
If the
1
(power) indicator is still flashing, there is a potential
monitor failure. Count the number of seconds between orange
flashes of the
1
(power) indicator and inform your authorized
Sony dealer of the monitor’s condition. Be sure to note the model
name and serial number of your monitor. Also note the make and
model of your computer and video board.
Specifications
CRT 0.24 mm aperture grille pitch (center)
17 inches measured diagonally
90-degree deflection
FD Trinitron
Viewable image size Approx. 327
×
243 mm (w/h)
(14
3
/
4
×
9
5
/
8
inches)
16.0" viewing image
Resolution
Maximum Horizontal: 1600 dots
Vertical: 1200 lines
Recommended Horizontal: 1024 dots
Vertical: 768 lines
Standard image area Approx. 312
×
234 mm (w/h)
(12
3
/
8
×
9
1
/
4
inches)
Deflection frequency* Horizontal: 30 to 85 kHz
Vertical: 48 to 120 Hz
AC input voltage/current 100 to 240 V, 50 – 60 Hz, Max. 1.7 A
Power consumption 120 W
Dimensions
Approx. 404
×
413.5
×
419.5 mm (w/h/d)
(16
×
16
3
/
8
×
16
5
/
8
inches)
Mass Approx. 20 kg (44 lb 1 oz)
Plug and Play DDC1/DDC2B/DDC2Bi
Supplied accessories See page 6
* Recommended horizontal and vertical timing condition
Horizontal sync width should be more than 1.0 µsec.
Horizontal blanking width should be more than 3.0 µsec.
Vertical blanking width should be more than 500 µsec.
Design and specifications are subject to change without notice.
Preset mode timing table
MENU
RESET
1
(power) indicator
MENU
No. Resolution
(dots
×
lines)
Horizontal
Frequency
Vertical
Frequency
Graphics
Mode
1640
×
480 31.5 kHz 60 Hz VGA-G
2640
×
480 43.3 kHz 85 Hz VESA
3720
×
400 31.5 kHz 70 Hz VGA-Text
4800
×
600 53.7 kHz 85 Hz VESA
5832
×
624 49.7 kHz 75 Hz Macintosh 16"
Color
6 1024
×
768 60.0 kHz 75 Hz VESA
7 1024
×
768 68.7 kHz 85 Hz VESA
8 1280
×
1024 80.0 kHz 75 Hz VESA
01US01COV-UC.book Page 16 Thursday, February 3, 2000 4:06 PM