Filter
Top Products
35
Symptom
You cannot connect
your CLIÉ handheld to
an access point.
You cannot access the
Internet.
The data transfer rate is
slow.
Cause/Remedy
• Your CLIÉ handheld and the access point
are placed too far apart.
pDecrease the distance between them.
• There is an obstacle that could block off
radio waves (e.g., metal plate, concrete
block) between your CLIÉ handheld and
the access point.
pMove your CLIÉ handheld and/or the
access point to different places.
pDisable the power saving mode.
(This will increase the power
consumption. Be careful of the
remaining battery power).
•
The channels of the access point are not set
at 1-11.
pChange the channel setting of the access
point.
• The access point you are using is not
configured for internet access.
pConnect the access point to the Internet,
following the operating instructions of
the access point.
•
There is a mistake in the Network settings.
pAsk your System Administrator about
the settings.
• Some other access points are interfering
with communication.
pChange the channel number of the
access point you are using. For details
on how to change the setting, see the
Operating Instructions of your access
point.
• The access point is being heavily used.
pWait a while and try access again.
Continued on next page