Filter
Top Products
11
GB
Selecting the on-screen menu
language (LANGUAGE)
English, German, French, Spanish, Italian, and Japanese versions
of the on-screen menus are available. The default setting is
English.
1
Press the MENU button.
2
Press the M(+)/m(–) buttons to select m.
3
Press the M(+)/m(–) buttons to select
(LANGUAGE) and press the OK button.
4
Press the M(+)/m(–) button to select a language.
• ENGLISH
• DEUTSCH: German
• FRANÇAIS: French
• ESPAÑOL: Spanish
• ITALIANO: Italian
• : Japanese
To close the menu
Press the MENU button once to return to normal viewing. If no buttons
are pressed, the menu closes automatically after about 30 seconds.
Selecting the input signal
You can connect two computers to this monitor using the INPUT
1 and INPUT 2 connectors. To select one of the two computers,
use the INPUT button.
Press the INPUT button.
The input signal and corresponding input indicator, “1” (INPUT
1) or “2” (INPUT 2) change each time you press this button.
Notes
• You cannot select the input signal when displaying the main menu on
the screen.
• If no signal is input to the selected connector, NO INPUT SIGNAL or
CABLE DISCONNECTED appears on the screen. After a few seconds,
the monitor enters the power saving mode. If this happens, select the
other connector using the INPUT button.
16
EXIT
PHASE
MENU
,
OFF
ON
BASS BOOST
EXIT
,
ENGL ISH
DEUTSCH
FRANÇAIS
ESPAÑOL
ITALIANO
LANGUAGE
EXIT
INPUT
OK
1
2
,,
INPUT
OK
1
2