Filter
Top Products
21
GB
Projecting
Setting Up and Projecting
Projecting
1
Plug the AC power cord into a wall outlet, and connect all equipment, then
open the front cover.
The ON/STANDBY indicator lights in red and the projector goes into
standby mode.
2
Press the I /
1
key.
The ON/STANDBY indicator lights in green.
3
Turn on the equipment connected to the projector.
4
Press the INPUT key to select the input source.
To input from Press INPUT to display
Computer connected to the INPUT A connector INPUT A
Computer connected to the INPUT B connector INPUT B
Memory Stick inserted to the Memoty Stick slot MS
Video equipment connected to the VIDEO input
connector
VIDEO
Video equipment connected to the S VIDEO input
connector
S VIDEO
I / 1
INPUT
FREEZE
MENU ENTER
D KEYSTONE
MS SLIDE
APA
LAMP/COVER
MENU POWER
INPUT
APARESETENTER
TEMP/FAN
POWERSAVING ON/STANDBY
ON/STANDBY
indicators
Rear remote control
detector