Filter
Top Products
11
GB
Viewing the Slide
Switching the File Display Mode
You can display one picture file only (Normal mode) or thumbnails of
picture files (Thumbnail mode).
1 Select “Index Display” in the MS Home, then press the ENTER key.
2 Select the setting, then press the ENTER key.
Normal: to display a picture file
Thumbnail: to display thumbnails of the picture files contained in the
selected contents.
To execute the slide show
When the slide show setting is set to “Auto” by the Projector Station for
Presentation, the slide show is executed according to the settings made by the
Projector Station for Presentation. When you want to end the slide show,
press the MS SLIDE or ENTER key. When the slide show setting is set to
“Manual”, press the following keys for the slide show.
,: to display the next slide
<: to display the previous slide
MS SLIDE: to end the slide show
To return to the MS Home before executing the slide show
Select “Close”.
Executing the Slide Show Promptly
As the settings are memorized even if you change the input after the setting
of steps 1 to 5, press the MS SLIDE key on the Remote Commander just as
you start the presentation. The input is changed to MS and the slide show
starts promptly. To end the slide show, press the MS SLIDE or ENTER key
when the slide show setting is “Auto”, or press the MS SLIDE key when the
slide show setting is “Manual”.
Sliding Material for a Presentation — Presentation Viewer