Filter
Top Products
5
EN
Adjusting the Picture Centering
The adjustment data becomes the unique setting for the
input signal received.
1 Press the CENTER button.
The “CENTER” OSD (On Screen Display) appears.
2 For vertical picture adjustment
Press the > >/. buttons.
> . . . to move up
. . . . to move down
For horizontal picture adjustment
Press the ¨ ?// buttons.
? . . . to move left
/ . . . to move right
To erase the “CENTER” OSD, press the CENTER button
again.
The “CENTER” OSD automatically disappears 10 seconds
after you release the buttons.
To reset, press RESET button while the OSD is on.
CENTER
CENTER
0 23
Adjusting the Picture Contrast
The adjustment data becomes the common setting for all
input signal.
1 Press the > >/. button.
The “CONTRAST/BRIGHTNESS” OSD (On Screen
Display) appears.
2 Press the > >/. buttons to adjust picture contrast.
> . . . for more contrast
. . . . for less contrast
The “CONTRAST/BRIGHTNESS” OSD disappears 3
seconds after you release the buttons.
To reset, press RESET button while the OSD is on.
CONTRAST BRIGHTNESS
23
0
80.0
kHz/75Hz
Adjusting the Picture Brightness
The adjustment data becomes the common setting for all
input signal.
1 Press the ¨ ?// button.
The “CONTRAST/BRIGHTNESS” OSD (On Screen
Display) appears.
2 Press the ¨ ?// buttons to adjust picture brightness.
? . . . for less brightness
/ . . . for more brightness
The “CONTRAST/BRIGHTNESS” OSD disappears 3
seconds after you release the buttons.
To reset, press RESET button while the OSD is on.
CONTRAST BRIGHTNESS
80.0
kHz/75Hz
0
23
POWER
SAVING
RESET
COLOR
GEOM
SIZE
CENTER
CONV
Adjustments
When one of the preset-type signals is input, no picture
adjustment is necessary.
You can, however, adjust the picture to your preferences by
the following procedure described below.
You can adjust the all items on the OSD (On Screen
Display). The item to be adjusted is indicated in white on
the OSD.
Control Panel
p Before adjusting the items, turn on the unit and feed the
video signal from the connected computer/work
station.
p Adjustments will be stored automatically.