Filter
Top Products
124
nN
Troubleshooting
What should I do if a BIOS error appears when I turn on my computer?
If the message "Press <F1> to resume, <F2> to setup" appears at the bottom of the screen, follow these steps:
1 Press the F2 key.
The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo
appears.
2 Set the date (month/day/year) with the Tab key and the +/- keys.
3 Press the
m key to select System Time, and then set the time (hour: minute: second) with the Tab key and the +/- keys.
4 Press the
, key to select the Exit tab, and then select Load Optimal Defaults and press Enter key.
The message Load Defaults?(Y/N) appears.
5 Press the Y key.
6 Select Exit Saving Changes and press the Enter key.
The message Exit Saving Changes? (Y/N) appears.
7 Press the Y key.
Your computer restarts.
If this occurs frequently, contact an authorized Sony Service Center. To find the nearest center or agent, see Sony Support
Information (page 156) or visit the Sony online support Web site.