Filter
Top Products
45
nN
Using Your VAIO Computer >
Using the Optical Disc Drive
If it is your first time to play a DVD video on your computer, follow these steps before inserting the disc:
1 Click Start and Computer.
2 Right-click the optical disc drive icon and select Properties.
3 Click the Hardware tab.
4 Select your optical disc drive from the All disk drives list and click Properties.
5 Click the DVD Region tab.
6 Select an appropriate region from the list and click OK.
!
You can change the region code only a limited number of times. When you have exceeded this number, the drive's region code is permanently assigned
and you will not be able to change it again. Reconfiguring your computer does not reset this count.
Any difficulties caused by changing the region code settings of the drive are not covered by the warranty.
If you change the region code while the WinDVD or the WinDVD BD is running, restart the software or eject the disc and re-insert it to make the new
setting effective.