Sony VPL-AW15 Projector User Manual


 
42
Sharpness Sharpens the outline of the picture, or reduces the noise.
The higher the setting, the sharper the picture. The lower the setting, the
softer the picture, thus reducing the noise.
NR (Noise Reduction) Reduces the roughness or noise of the picture.
Usually, select “Off”.
If the picture is rough or noisy, select a setting from among “Low”,
“Middle” or “High” according to the input signal source.
DDE (Dynamic Detail
Enhancer)
According to the film source you have selected, make a setting for
playback.
Film: Normally, select this option. Reproduces the 2-3 Pull-Down film
sources with smooth picture movement. When the video signal with a
format other than the 2-3 Pull-Down is input, “Progressive” is
automatically selected.
Progressive: Converts an interlace format video signal to a progressive
format.
Off: Plays a video signal in an interlace format without converting.
Black Level Adj.
(Adjust)
Produces a bolder, dynamic picture.
Set according to the input signal source.
High: Gives higher emphasis to the black color.
Low: Gives lower emphasis to the black color.
Off: Cancels this feature.
Gamma Correction Adjusts the response characteristics of the tone of the picture.
Select a favorite tone from three options.
Gamma1: Makes a scene a little brighter.
Gamma2: Makes a scene brighter.
Gamma3: Makes a scene darker.
Off: Gamma Correction is “Off”.