Filter
Top Products
36
Using Various Functions During Projecting
To cancel Panel Key Lock with the
key on the projector
Press and hold the MENU key for
approximately 10 seconds while the power is
on. Locking is canceled, and the function is
set to “Off”.
A commercially available antitheft cable
such as one (manufactured by Kensington)
can be attached to the antitheft lock.
For details, refer to the home page of
Kensington.
Kensington Web page address:
http://www.kensington.com/
Using Various
Functions During
Projecting
You can select a section of the image to
enlarge. This function will be active only
when a signal from a computer is input or an
input signal of “Network” or “USB” is
selected. (VPL-DX15 only)
This function does not work when a video
signal is input.
1 Project a normal image, and press the
D ZOOM + key on the Remote
Commander.
The digital zoom icon appears in the
center of the image.
2 Move the icon to the point on the
image you want to enlarge. Use the
arrow key (v/V/b/B) to move the
icon.
3 Press the D ZOOM + key again.
The portion of the image where the icon
is located is enlarged. The enlargement
Security Lock (Mechanical)
Zoom a Part of the Image
(Digital Zoom)
INPUT
MENU
NETWORK USB
RESET
AUTO FOCUS
D ZOOM
LENS
ENTER
VOLUME
KEYSTONE
/TILT
FREEZE
PIC MUTING
AUDIO MUTING
APA
2
1,3
RESET
FREEZE
Digital zoom
icon