Sony VPL-EX4 Projector User Manual


 
15
Connecting the Projector
Projecting the Picture
If you set your computer, such as a notebook
computer, to output the signal to both your
computer’s display and the external monitor,
the picture of the external monitor may not
appear properly. Set your computer to output
the signal to only the external monitor.
For details, refer to the operating
instructions supplied with your computer.
To connect a Macintosh computer equipped
with a video output connector of a type having
two rows of pins, use a commercially available
plug adaptor.
This section describes how to connect the
projector to a VCR.
For more information, refer to the
instruction manuals of the equipment you
are connecting.
To connect to a video or S video
output connector
1 Stereo audio connecting cable (not supplied)
(Use a no-resistance cable.)
2 Video cable (not supplied) or S-Video cable
(not supplied)
Note
Connecting a VCR
S VIDEO VIDEO AUDIO AUDIO A/B INPUT A
INPUT
INP
U
VCR
to S
video
output
Rear side
to audio
output (R)
to video
output
to audio
output (L)