Filter
Top Products
17
Location and Function of Controls
Overview
k USB key
This function is not provided in this
projector.
l APA (Auto Pixel Alignment) key
Automatically adjusts a picture to its
clearest while a signal is input from a
computer.
For details, see “Smart APA” in “The
SET SETTING Menu” on page 33.
m LENS key
This function is not provided in this
projector.
n KEYSTONE (Trapezoidal
distortion correction) /TILT key
Adjusts the vertical trapezoidal
distortion of the image. Pressing this
key, the adjustment menu are displayed.
Use the arrow keys (v/V/b/B) for
adjustment.
o PIC MUTING key
Cuts off the picture. Press again to
restore the picture.
p AUDIO MUTING key
Cuts off the sound. Press again to restore
the sound.
q FREEZE key
Freezes the projected picture. To cancel
the frozen picture, press the key again.
This function is available when the PC
signal is input.
Before using the Remote
Commander
Pull out the clear film from the lithium
battery holder.
To replace a battery
1 Pull out the battery cover by a thin
stick inserting to a hole, as shown the
illustration.
2 Install the lithium battery.
3 Put the lithium battery holder back
into the Remote Commander.
Notes on the lithium battery
• A button type lithium battery (CR2025) is
used in the Remote Commander. Do not
use batteries other than CR2025.
• Keep the lithium battery out of the reach of
children.
• Should the battery be swallowed,
immediately consult a doctor.
Notes on Remote Commander
operation
• Make sure that nothing obstructs the
infrared beam between the Remote
Commander and the remote control
detector on the projector. Aim the Remote
Commander at the front of the remote
control detector or the screen.
• The operation range is limited. The shorter
the distance between the Remote
Commander and the remote control
detector is, the wider the angle within
which the commander can control the
projector becomes.
Face the +
side up.