Filter
Top Products
24
Security Lock
The menu currently selected is shown as
a yellow button.
4 Press the v or V key to select the
MENU SETTING menu, then press
the B or ENTER key.
The selected menu appears.
5 Press the v or V key to select
“Language,” then press the B or
ENTER key.
6 Press the v, B, b or V key to select a
language, then press the ENTER key.
The menu changes to the selected
language.
To clear the menu
Press the MENU key.
The menu disappears automatically if a key
is not pressed for one minute.
Security Lock
The projector is equipped with a security
lock function. When you turn the power of
the projector on, you are required to input
the previously set password. If you do not
input the correct password, you will not be
able to project the picture.
• You will not be able to use the projector if
you forget your password and the password
administrator is not available. Be please
aware that using the security lock can prevent
valid usage in such cases.
• When you set the security lock being active,
the password will be necessary only when
the power is turned on after plugging the
power cord.
To use the security lock
1 Press the MENU key and then, on the
INSTALL SETTING menu, turn on
the
“Security Lock” setting.
2 Enter the password.
Use the MENU, v/V/b/B, and ENTER
keys to enter the four-digit password.
(The default initial password setting is
“ENTER, ENTER, ENTER, ENTER.”
After this is entered you can put in your
own password. Therefore, when you use
this function for the first time, please
input “ENTER” four times.)
Next, the screen for entering the new
password is displayed.
(Enter the password on this screen even
if you want to keep the current
password.)
Notes
Enter password key.
Password required for power-on.
Use: Cancel: Other key