Filter
Top Products
13
Location and Function of Controls
Overview
AUDIO input L (MONO)/R (phono
type)
Connect to the audio output of video
equipment. For stereo equipment use
both the L and R jacks; for monaural
equipment use the L (MONO) jack only.
2/3 INPUT A/INPUT B
Analog RGB connector (HD D-sub
15-pin, female)
Connects to external equipment such as
a computer.
Connects to the monitor output of a
computer using an optional cable.
AUDIO jack (stereo minijack)
To listen to sound output from a
computer, connect via this jack to the
audio output of the computer.
For details, see “Connecting a
Computer” on page 17 and
“Connecting a VCR” on page 19.
d OUTPUT
MONITOR connector (HD D-sub
15-pin, female)
Connect to the video input connector of
the monitor. Outputs signals from the
selected channel and computer signals
only from among the signals from the
INPUTA, INPUT B or INPUT C.
This connector does not output any
signals from the INPUT D connector.
AUDIO jack (stereo minijack)
Connects to external active speakers.
The volume of the speakers can be
controlled by the VOLUME +/– keys on
the Remote Commander.
When INPUTA, INPUT B or INPUT C
is selected, the sound input to the
AUDIO connector which is for
INPUTA, INPUT B or INPUT C is
output.
When VIDEO or S VIDEO is selected,
the sound input to the AUDIO input
connector of VIDEO IN is output.
e REMOTE
RS-232C connector (D-sub 9-pin,
female)
Connects to a computer to operate the
projector from the computer.
f AC IN socket
Connects the supplied AC power cord.
g CONTROL S IN/PLUG IN POWER
(DC 5V output) jack (stereo
minijack)
Connects to the control S out jacks of
Sony equipment. Connects to the
CONTROL S OUT jack on the supplied
Remote Commander when using it as a
wired Remote Commander. In this case,
when a stereo cable is used, you do not
need to install batteries in the Remote
Commander as the power is supplied
from this jack.
h INPUT C
Analog RGB/Component
connectors (R/R-Y/P
R, G/Y, B/B-Y/
P
B, HD, VD) (BNC type)
We recommend using this terminal when
signals are to be transmitted over greater
distance than usual, such as when the
projector is suspended from a ceiling.
Computer, component (R-Y/Y/B-Y),
HDTV or DTV (DTV GBR, DTV
YP
BPR) signal can be selected.
AUDIO (stereo minijack)
Connects to the audio output on a
computer.
i INPUT D
Digital RGB/Component
connector (HDMI) (accepts HDCP)
Connects to a video output connector on
video equipment or a computer
equipped with HDMI/DVI output
connector (digital).
j INPUT E
NETWORK connector (RJ-45)
Connects to the LAN cable when the
network function is in use.
CAUTION
For safety, do not connect the connector
for peripheral device wiring that might
have excessive voltage to this port.
Follow the instructions for this port.