Filter
Top Products
15
Location and Function of Controls
Overview
m MUTING keys
Cut off the picture and sound.
• PIC: Cuts off the picture. Press again
to restore the picture.
• AUDIO: Press to temporarily cut the
audio output from the speaker or audio
signal from the AUDIO jack of
OUTPUT. Press again or press the
VOLUME+ key to restore the sound.
n D ZOOM (Digital Zoom) +/– key
This function is not provided in this
projector.
o ZOOM +/– keys
Adjusts the picture size.
p FOCUS +/– keys
Adjusts the picture focus.
q SHIFT +/– keys
Adjusts the vertical/horizontal position
of the picture.
r M/m/</, keys (Arrow)
Used to enter the settings of items in the
menu or make adjustment for zoom,
focus or shift.
s MENU key
t COMMAND ON/OFF switch
When this switch is set to OFF, the keys
on the Remote Commander do not
function. This saves battery power.
u Infrared transmitter
To install batteries
1 Push and slide the lid to open it, then
install the two size AA (R6) batteries
(supplied) with the correct polarity.
While pressing the lid, slide it.
Be sure to install the battery from
the
# side.
2 Replace the lid.
Notes on Remote Commander
operation
• Make sure that nothing obstructs the
infrared beam between the Remote
Commander and the remote control
detector on the projector. Direct the
Remote Commander toward the front or
rear remote control detector.
• The operation range is limited. The shorter
the distance between the Remote
Commander and the projector is, the wider
the angle within which the commander can
control the projector becomes.
CAUTION
Danger of explosion if battery is incorrectly
replaced.
Replace only with the same or equivalent
type recommended by the manufacturer.
When you dispose of the battery, you must
obey the law in the relative area or country.