Filter
Top Products
38 Controlling the Projector from a Computer / Setting Up the Projector
Controlling the
Projector from a
Computer
Click “Control.”
You can perform various adjustments and
settings of the projector on a computer
display.
The function of the buttons in the windows
are the same as those on the remote control
supplied with the projector.
If you change the setting using the remote
control, click “Refresh” in the upper right-
hand corner of the window to update the
status.
Setting Up the
Projector
Click “Setup.”
The Password Properties dialog box
appears.
The name of the “User” account is preset
without a password to “root” at the factory.
You can set the owner information, date and
time, Mail Report, etc.
Click “Apply” in the lower part of each
window to update the projector to the data
input in each window.
Owner information
This information is used for the Mail Report
function.
Owner
Enter owner information.
Projector
Enter the location and lens type of the
projector.
The present setting status is indicated