Filter
Top Products
2
VPL-VW85
2. Common Commands
2-1. Sub Commands
Sub Command is the value which is used by Simplified Command. Value is assigned for executing
function. For example, if you want to change the picture mode, the appropriate value assigned for the
desired picture mode should be chosen.
<Table 1> <Table 2> Remarks
Item Number Data
Item Upper byte Lower byte Data Byte
Picture Mode 00h 02h Dynamic 0000h Set/Get
Standard 0001h
Cinema1 0002h
Cinema2 0003h
Cinema3 0004h
User 0005h
Contrast 00h 10h Set Value 0000h to 0064h (0 to 100)
Brightness 00h 11h Set Value 0000h to 0064h (0 to 100)
Color 00h 12h Set Value 0000h to 0064h (0 to 100)
Hue 00h 13h Set Value 0000h to 0064h (0 to 100)
Sharpness 00h 14h Set Value 0000h to 0064h (0 to 100)
Color Temp. 00h 17h High 0000h
Mid 0001h
Low1 0002h
Custom1 0003h
Custom2 0004h
Custom3 0005h
Custom4 0006h
Low2 0007h
Custom5 0008h
Lamp Control 00h 1Ah Low 0000h
High 0001h
Black Level Adj.
*1
00h 1Ch Set Value FFFDh to 0003h (_3 to 3)
*1 The data definition of “Black Level Adj.” differs depending on the model.
2-1-1. ITEM List
Item list tables are described below. Tables are shown per function category.
Table 2-1 ITEM List For Picture