Source Technologies ST9650 Printer User Manual


 
Source Technologies, LLC ST9650 Secure MICR Printer User’s Guide
73
<ESC>(10O<ESC>(s0p8h8v0s7b360T<ESC>&k15H font data The Selection
String
<ESC>(30802X<ESC>&k15H font data The ID Call
See Font Mapping Appendix pages for specific character set data for each font.
PJL Info MICR Command
The ST Secure MICR Printer supports an optional custom bi-directional PJL Inquiry
Command. The command provides printer information and cartridge information for
network management. The command format is; @PJL INFO MICR
The command should be sent with UEL (Universal Exit Language) commands.
Example:
<ESC>%-12345X UEL
@PJL INFO MICR INFO MICR Command
<ESC>%-12345X UEL
The following data is returned
@PJL INFO MICR
PRINTER STATE = READY
= BUSY
= NOT READY
SERIAL NUMBER = XXXXXXXX
PAGECOUNT = 123456
CARTRIDGE TYPE = NORMAL
= MICR
CARTRIDGE STATUS = UNKNOWN
= OK
= LOW
= EMPTY
CARTRIDGE SERIAL# = XXXXXXXX
TONER LEVEL = 0-9
= UNKNOWN
CARTRIDGE COUNT = XXXX
LOW THRESHOLD = XXXX
EMPTY THRESHOLD = XXXX
Printer State
o “Ready” is the expected return
Serial Number = Printer Serial Number
Page Count = Printer Page Count
Cartridge Type
o “MICR” is the expected return. “Normal” could mean the command was
sent to a non-MICR printer
Cartridge Status
o “OK, Low, and Empty” are the expected returns. “Unknown” is possible if
the cartridge had just been installed.
Cartridge Serial = Cartridge Serial Number
Appendix G