Filter
Top Products
40 Drivers Installation Guide
4) From root directory, type the following commands:
mkdir/inst
cd /inst
tar xvf /tmp/trisco.tar.
(Note: there is a period at the end of the last command.)
5) Install the driver by typing:
./install
6) Reboot your SCO UNIX system..
OS/2 2.0 and WARP 3.X
1) Copy TRIOS2.ADD from the floppy diskette to your hard disk
under the OS2 directory (i.e., C:\OS2).
2) Edit C:\CONFIG.SYS to replace BASEDEV=IBM1S506.ADD
with BASEDEV=TRIOS2.ADD
3) Reboot the system.
Note: For more information (like parameter settings, driver de-
installation, etc.), please refer to the README.TXT file on the
diskette.