Hardware Setup SY-5EHM/5EH5
34
Step 19. CACHE CONFIGURATION
This mainboard has a built-in 1MB Level 2 Pipelined Burst cache
onboard to improve the system performance.
The cache size and RAM locations are specified as follows:
Cache Size Cache RAM TAG RAM
Cacheable
Range
1 MB
64K x 64
on U2,U3
32K x 8
on U5
WT: 256 MB
WB: 128MB
512 KB
64K x 64
on U2
32K x 8
on U5
WT: 128 MB
WB: 64 MB
Step 20. Power On
You have now completed the hardware installation of your
mainboard successfully.
1. Turn the power on
2. To enter the BIOS Setup Utility, press the <DEL> key while the
system is performing the diagnostic checks,
Note: If you have failed to enter the BIOS, wait until the boot
up sequence is completed. Then push the RESET button and
press <DEL> key again at the beginning of boot-up, during
diagnostic checks.
Repeat this operation until you get the following screen.