Filter
Top Products
Hardware Setup SY-5EHM/5EH5 V1.0
7
2-2 Unpacking the Motherboard
When unpacking the Motherboard, check for the following items:
Ø The SY-5EHM/5EH5 V1.0 ETEQ82C663 PCI/AGP
Motherboard
Ø The Quick Start Guide *
Ø The Installation CD-ROM *
Ø The CPU Retention Set
Ø One IDE Device Flat Cable
Ø One Floppy Disk Drive Flat Cable
Ø One bracket with one 9-pin serial connector, attached with 9-
pin flat cable, and one 6-pin PS/2 mouse connector, attached
with 6-pin cable.
Ø One bracket with one 25-pin connector paraller connector
attached with 25-pin flat cable and one 9-pin serial connector
attached with 9-pin flat cable.
* If your board comes with a driver disc and a paper manual, the Quick Start Guide
and the CD-ROM are not included in the package.
Warning: Do not unpack the Motherboard from its anti-
static packaging until you are ready to install it.
Like most electronic equipment, your Motherboard may be damaged
by electrostatic discharge. To avoid permanent damage to
components ground yourself while working by using a grounding
strap. Otherwise, ground yourself frequently by touching the
unpainted portion of the computer chassis to drain the static
charges.
Handle the Motherboard carefully, holding it by the edges.
You are now ready to start the installation.