Drivers Installation SY-5EHM/5EH5 V1.0
67
Step 2. Install Drivers and Utilities
The following describes the best way of installing Windows 95 or
Windows 98 on your 5EHM/5EH5 V1.0 Motherboard:
Ø
The following BIOS default settings should not be changed:
1. The ‘ OnChip USB Controller’ item under ‘ Chipset features Setup’
is set to enabled.
2. The ‘ USB Assigned IRQ’ item under ‘ PnP/PCI Configuration is set
to enabled.
You MUST have these two items enabled for Windows 95/98 to run
properly on your system.
Ø Install Windows 95/98
Ø If you installed Windows 95 you will now need to upgrade your
USB driver by running the following program on your Windows
CD:
Ø Win95/OSR2/Usbsupp/USBsupp.exe
Ø After installation of windows, you will need to install the VIA
drivers. Follow the instruction below.
Click the Enter SOYO CD button to display the list of drivers that
can be installed on your Motherboard. The start-up program
displays the drivers available for the 5EHM/5EH5 V1.0 and the
Windows version you use. For Windows 95 five drivers will be listed
(see ‘ Driver Installation Menu’ below), for Windows 98 also five
drivers will be listed (the Southbridge drivers will be replaced by the
IRQ remapping utility).