Filter
Top Products
Hardware Setup SY-5EHM/5EH5 V1.2
22
Step 6. DRAM Module Installation
This Motherboard supports two strips of 72-pin 5V FPM/EDO DRAM
(SIMM) from 4 to 64 MB and two strips 168-pin 3.3V/5V Unbuffered
DIMM modules from 8 to 256 MB. The Motherboard requires SIMM
modules of at least 70ns access time.
This Motherboard supports both EDO and SDRAM types of memory
modules.
Note: Do not install EDO type of DIMM modules if you already
use SDRAM in any DIMM bank.
l MEMORY CONFIGURATION
This Motherboard features 2 x DIMM Banks for 168-pin 3.3V
unbuffered DIMM modules; 2 x SIMM Banks for 72-pin.
Your board comes with one SIMM Bank (2 modules) and two DIMM
sockets, providing support for up to 512MB of main memory using
DIMM modules from 8MB to 256MB. For 66MHz host bus CPUs use
6
6
5
5
4
4
3
3
2
2
1
1
*
DIMM 2
DIMM1
SIMM1
SIMM2