Filter
Top Products
Drivers Installation SY-5EHM/5EH5 V1.2
68
Step 3. Install Drivers and Utilities
The following describes the best way of installing Windows
95 or Windows 98 on your 5EHM/5EH5 V1.2 Motherboard:
Ø
The following BIOS default settings should not be
changed:
1. The ‘ OnChip USB Controller’ item under ‘ Chipset features Setup’
is set to enabled.
2. The ‘ USB Assigned IRQ’ item under ‘ PnP/PCI Configuration is set
to enabled.
You MUST have these two items enabled for Windows
95/98 to run properly on your system.
Ø
Install Windows 95/98
Ø
If you installed Windows 95 you will now need to
upgrade your USB driver by running the following
program on your Windows CD:
Win95/OSR2/Usbsupp/USBsupp.exe
Ø
After installation of windows, you will need to install the
ETEQ drivers. Follow the instruction below.
Click the Enter SOYO CD button to display the list of drivers that
can be installed on your Motherboard. The start-up program
displays the drivers available for the 5EHM/5EH5 V1.2 and the
Windows version you use.