Filter
Top Products
SY-6BE+ Quick Start Guide
6
Hardware
Installation
Install the Motherboard
Follow the steps below in order to perform the installation of your new
SY-6BE+
Motherboard.
Step 1. Install the CPU
Mark your CPU Frequency:
Record the working frequency of your CPU
that should be clearly marked on the CPU cover.
FSB 66MHz
266MHz (66 x 4.0) 333MHz (66 x 5.0) 400MHz (66 x 6.0)
300MHz (66 x 4.5) 366MHz (66 x 5.5) 433MHz (66 x 6.5)
FSB 100MHz
350MHz (100 x 3. 5) 450MHz (100 x 4.5) 550MHz (100 x 5.5)
400MHz (100 x 4.0) 500MHz (100 x 5.0) 600MHz (100 x 6.0)
CPU Mount Procedure:
To mount the processor that you have purchased
separately, follow these instructions.
Retention Module Step 1. Open the two sides by folding them up.
Step 2. Insert the CPU into the retention
module. The CPU fits in the CPU
slot in only ONE way, do not try to
force it in.
Step 3. After completely inserting the CPU,
Now your CPU is ready for use.
Note: Installing a heat sink and cooling fan on top of your CPU is necessary for proper heat dissipation. Failing to
install these items may result in overheating and possible burn-out of your CPU.