Filter
Top Products
SY-6VZA Quick Start Guide
14
The SOYO CD
Please note that if the Start Up program was unable to determine which SOYO Motherboard
you own, the manual selection menu will pop up, as shown below. Then select the user's
manual file that corresponds to your Motherboard model name and click
OK.
(Manual Selection Menu)
The user's manual files included on the SOYO CD can be read in PDF (Postscript
Document) format. In order to read a PDF file, the appropriate Acrobat Reader software
must be installed in your system.
Note:
The Start Up program automatically detects if the Acrobat Reader utility is already
present in your system, and otherwise prompts you on whether or not you want to install it.
You must install the Acrobat Reader utility to be able to read the user's manual file. Follow
the instructions on your screen during installation, then once the installation is completed,
restart your system and re-run the SOYO CD.
Step 3. Install Drivers and Utilities
The following describes the best way of installing Windows 95 or Windows 98 on your SY-
6VZA Motherboard:
Ø
The following BIOS default settings should not be changed:
1. The ‘OnChip USB Controller’ item under ‘Chipset features Setup’ is set to enabled.
2. The ‘USB Assigned IRQ’ item under ‘PnP/PCI Configuration is set to enabled.
You MUST have these two items enabled for Windows 95/98 to run properly on your
system.
Ø
Install Windows 95/98
Ø
After installation of windows, you will need to install the VIA drivers. Follow the
instruction below.
Please select your manual In the box below
and click OK.
SOYO CD Manuals
6VZA OK Back