Filter
Top Products
Hardware Setup SY-7IZB+
25
2. Select [STANDARD CMOS SETUP]
Set [Date/Time] and [Floppy drive type], then set [Hard Disk Type] to
“ Auto”.
3. Select [SOYO COMBO SETUP]
Move the cursor to the [CPU Frequency] field to set the CPU
frequency, as shown in the following display.
Available [CPU Frequency] settings on your SY-7IZB+ Motherboard
are detailed in the following table. You are then required to fill in the
next two consecutive fields: (1) the CPU Host/PCI Clock, and (2) the
CPU Frequency.
CPU Frequency
300MHz (66 x 4.5)
333MHz (66 x 5.0)
366MHz (66 x 5.5)
400MHz (66 x 6.0)
433MHz (66 x 6.5)
466MHz (66 x 7.0)
500MHz (66 x 7.5)
Select the working frequency of your Celeron
TM
processor among these preset values.
Note: Mark the checkbox that
corresponds to the working frequency of your
Celeron
TM
processor in case the CMOS
configuration should be lost.
Note: if you use Bus Frequencies of 75 MHz, make sure that
your PCI cards can cope with the higher PCI clock.