Filter
Top Products
SY-7VCA
Quick Start Guide
7
Hardware
Installation
Install the Motherboard
To perform the installation of your new
SY-7VCA
Motherboard, follow the steps below:
Step 1. CPU Installation
Mark your CPU Frequency:
Record the working frequency of your CPU that
should be clearly marked on the CPU cover.
FSB 66MHz
400MHz (66 x 6.0) 466MHz (66 x 7.0) 533MHz (66 x 8.0) 600MHz (66 x 9.0) 667MHz (66 x 10.0)
433MHz (66 x 6.5) 500MHz (66 x7.5) 566MHz (66 x 8.5) 633MHz (66 x 9.5) 700MHz (66 x 10.5)
FSB 100MHz
500MHz (100 x 5.0) 600MHz (100 x 6.0) 700MHz (100 x 7.0) 800MHz (100 x 8.0)
550MHz (100 x 5.5) 650MHz (100 x 6.5) 750MHz (100 x7.5) 850MHz (100 x 8.5)
FSB 133MHz
533MHz (133 x 4.0) 667MHz (133 x 5.0) 800MHz (133 x 6.0) 933MHz (133 x 7.0)
600MHz (133 x 4.5) 733MHz (133 x 5.5) 866MHz (133 x 6.5)
CPU Mount Procedure:
To mount the Coppermine
TM
processor that you have
purchased separately, follow these instructions.
1.
Lift the socket handle up to a vertical position.
2.
Align the blunt edge of the CPU with the matching pinhole edge on the socket.
3.
Seat the processor in the socket completely and without forcing.
4.
Then close the socket handle to secure the CPU in place.
Remember to connect the CPU Cooling Fan to the appropriate power
connector on the Motherboard. The fan is a key component that stabilizes the
system. It prevents the equipment from overheating and prolongs the life of
your CPU.
1 2
3 4
S
o
c
k
e
t
3
7
0
S
o
c
k
e
t
3
7
0
S
o
c
k
e
t
3
7
0
S
o
c
k
e
t
3
7
0