Filter
Top Products
Hardware Setup SY-D6IBA
8
2-3 INSTALLATION GUIDE
We will now begin the installation of the Motherboard. Please follow
the step-by-step procedure designed to lead you to a complete and
correct installation.
Warning: Turn off the power to the Motherboard, system chassis,
and peripheral devices before performing any work on the
Motherboard or system.
BEGIN THE INSTALLATION
Step 1. Single or Dual CPU Installation
Notice 1 (Dual processor): When installing two processors
(Dual CPU), please make sure the front side bus and working
frequency are identical for both processors.
Notice 2 (Single processor): If you are using a single
processor, preferably install the processor in Slot 1 #1, leaving
Slot 1 #2 empty for future expansion to dual CPU.
Your SY-D6IBA Motherboard comes with two CPU retention Module.
The retention set is used to hold each Single or Dual Slot1
processor attached to the Slot 1 #1 or Slot1 #2 CPU connectors on
the Motherboard.
Your SY-D6IBA motherboard comes with a CPU retention set kit.
The retention set is used to hold the processor attached to the Slot 1
CPU connector on the motherboard.