Filter
Top Products
BIOS Setup Utility SY-K7VTA PRO
23
sensor pins, to avoid the power off. Users may press the “Insert”
key to jump over the “Power Off” mode; go to the BIOS and
disable “FOC”. Now system can be booted normally.
4. The power connector of the CPU fan must be connected to the
specified “CPU Fan Connector” on the motherboard to secure the
normal functioning of the system.
We provide the following User-Friendly protection features:
1.Fan-Off Control : The motherboard detects the status of the CPU
fan and protects the CPU by automatically disconnecting the
power supply. The default value of this function is Enable. After
booting up, the user may disable it.
2.CPU Socket Sticker : Users will find a sticker on the CPU socket,
which reminds them of the correct usage of the K7 CPU.
3. Heat Dissipation Paste: Heat Dissipation Paste is included for all
Socket-A motherboards, to enhance the heat dissipation
capability.
Furthermore, we strongly recommend our users to enable the function of H/W
monitoring in the BIOS. This function, together with the FOC, provide the total
protection to the CPU and allow it to maximize its performance.
Mark your CPU Frequency:
Record the working frequency of
your CPU that should be clearly marked on the CPU cover.
200MHz FSB DDR transfer on Athlon
750 MHz (100 x 7.5) 800 MHz (100 x 8.0) 850 MHz (100 x 8.5) 900 MHz (100 x 9.0) 950 MHz (100 x 9.5)
1GHz (100 x 10.0) 1.1GHz (100 x 11.0) 1.2GHz(100 x 12.0) 1.3 GHz (100 x 13.0)
200MHz FSB DDR transfer on Duron
600 MHz (100 x 6.0) 650 MHz (100 x 6.5) 700 MHz (100 x 7.0) 750 MHz (100 x 7.5) 800 MHz (100 x 8.0)
850 MHz (100 x 8.5) 900 MHz (100 x 9.0) 950 MHz (100 x 9.5)
266MHz Front Side Bus DDR transfer on Athlon
1 GHz (133 x 7.5) 1.13 GHz (133 x 8.5) 1.2 GHz (133 x 9.0) 1.33 GHz (133 x 10.0)