Filter
Top Products
BIOS Setup Utility SY-K7VTA PRO
44
2-3.5 Voice Doctor
If the system does not boot-up properly, the Voice Doctor will inform the
user by voice through internal/external speaker at what point in boot-up
sequence the problem arises.
Below are the possible errors the user may encounter:
7. The Processor might be damage or not installed properly
8. The memory module might be damage or not installed properly
9. VGA card might be damage or not inserted properly
10. No Keyboard connected
11. Defective HD-Driver (IDE)
12. Floppy might error
Voice Doctor supports two language, refer the table below on the language
you prefer.
Voice Doctor’ s
Language
English Language Chinese Language
JP7 Setting Short pin 1-2 Short pin 2-3
2-3.6 CMOS Clearing (JP5)
After you have turned off your computer, clear the CMOS memory by
momentarily shorting pins 2-3 on jumper JP5, for a few seconds. Then
restore JP5 to the initial 1-2 jumper setting in order to recover and retain
the default settings.
Jumper JP5 can be easily identified by its white colored cap.
CMOS
Clearing
Clear CMOS Data Retain CMOS Data
JP5 Setting
Short pin 2-3 for
at least 5 seconds to
clear the CMOS
Short pin 1-2
to retain new
settings
Note: You must unplug the ATX power cable from the ATX power
connector when performing the CMOS Clear operation.
123
12
3
123
123